AW: [FIELDTRIP] ft_channelrepair with neuromag data

Wed Oct 27 17:01:46 CEST 2010

Hi Burkdard and Nina,

First off, thanks for the great advice Burkhard (and Jan-Mathijs).
Following your advice, I processed my raw neuromag data with maxfilter,
and I ended up with some results that are quite similar to what Nina is
seeing.  This doesn't happen for all of my subjects, but for about half
of them, I get increased noise in select channels following maxfilter.
I believe I used maxfilter v2.0 and my command line was:

maxfilter -f $f_i{each subject's fif file} -origin 0 0 40 -frame head
-autobad 30 -badlimit 7 -in 8 -out 3 -trans default

You mentioned that this should probably be posted to the neuromag list,
but I am not currently on that list and wasn't able to find it with a
quick search.  I'd be happy to repost there if you point me to the
sign-up page.

Thanks!
David

On 10/26/2010 4:46 AM, Burkhard Maess wrote:
> Dear Nina,
>
> indeed this looks funny. I have seen that maxfilter sometimes has
> produced unexpected results, but usually the channels have less noise
> after transformation. Your displays demonstrate the problem, but
> provide insufficient information to search for origin of it. I think,
> it is necessary to place one of these files to an ftp-server together
> with the list of bad channels you have used and the version of
> maxfilter. I would recommend to ask Jukka Nennonen for help because he
> is the maxfilter-pro and the displayed result should not show up. We
> shall continue the discussion here when we know the reason for this
> strange behavior.
>
> best wishes,
> Burkhard
>
>
>
> Nina Kahlbrock wrote:
>> Dear Burkhard,
>> I am also working on NM306 data and I have a specific problem repairing
>> broken channels using maxfilter. This email might thus be more suited
>> for
>> the neuromeg discussion list. However, I thought it might be of
>> interest to
>> other NM users as well...
>> What I would like to do is pretty much the same as described in the
>> previous
>> mails: interpolate broken channels and use a standard head position for
>> multiple recordings in one subject.
>> I used fieldtrip's automatic and semi-automatic artifact rejection
>> routines
>> to identify channels that are flat, show jumps and are noisy. I defined
>> these as bad in maxfilter. Then I used sss/tsss to achieve the desired
>> steps. It seemed very straight forward. However, when looking at the
>> results, the signal seems to be increased (and
>> more noisy and jumpy) in certain channels (see attached pdfs of bad and
>> non-bad channel (1st page: raw data, 2nd page: sss data, 3rd page: tsss
>> data). Have you ever experienced anything like this? The only reason
>> I can
>> come up with is that in maxfilter I used the continuous raw data file
>> and
>> not as in fieldtrip, only trials. Between trials there are pauses,
>> where the
>> channels could have been affected by a few movements. Could this
>> explain my
>> difficulties?
>> Is there a way to 'only' interpolate channels and realign the head,
>> without
>> impacting other non-broken channels?
>> Thank you very much for your answer!
>> Nina
>>
>>
>> -----Ursprüngliche Nachricht-----
>> Von: FieldTrip discussion list [mailto:FIELDTRIP at NIC.SURFNET.NL] Im
>> Auftrag
>> von Burkhard Maess
>> Gesendet: Freitag, 22. Oktober 2010 09:25
>> An: FIELDTRIP at NIC.SURFNET.NL
>> Betreff: Re: [FIELDTRIP] ft_channelrepair with neuromag data
>>
>> Dear David,
>>
>> I agree with Jan-Mathijs.
>>
>> variant a: apply maxfilter - that will repair all broken channels.
>> You also can manually define certain channels as broken. Maxfilter
>> may also align data of different headpositions to a single position.
>>
>> variant b: use megrealign - it includes a minimum norm localization
>> and from there MEG data is forward computed. In this way, you can
>> repair channels, align different head positions to the same and even
>> convert data between different systems.
>>
>> all the best,
>> Burkhard
>>
>>
>> jan-mathijs schoffelen wrote:
>>> Dear David,
>>>
>>> This is a good point. As far as I can see from the code, no
>>> distinction is made between gradiometers and magnetometers.
>>> Naively, I would propose the following: first indeed split the data
>>> into two subset: gradiometers only and magnetometers only, only then
>>> apply the channel reparation routine. Yet, for the gradiometer
>>> subset data, it is questionable whether as such the replacement of a
>>> bad channel with its neighbours makes sense, because this would lead
>>> to averaging gradients of the magnetic field with an orthogonal
>>> orientation.
>>>
>>> In other words, this is probably not the most sensible approach. I
>>> don't think repairing after combining the planar gradients is
>>>  desired, because this leads to an unwanted amplification of the
>>> noise (because the combination step results in taking an absolute
>>> value). Alternatively, you could consider using ft_megrealign, which
>>> in principle could be used to repair bad channels. The recipe would
>>> be to only use the data with the clean channels in the input, and
>>> you would want to interpolate the data back onto the original
>>> sensor-array. An example for interpolating between two types of
>>> CTF-systems is shown here
>>> http://fieldtrip.fcdonders.nl/example/megrealign.
>>>
>>> Just out of curiosity: doesn't the maxfilter in the Neuromag
>>> software allow for similar things?
>>>
>>> Best wishes,
>>>
>>> Jan-Mathijs
>>> On Oct 21, 2010, at 9:49 PM, David Ziegler wrote:
>>>
>>>> Hi Fieldtrippers,
>>>>
>>>> I would like to use ft_channelrepair to interpolate data for some
>>>> missing/deleted channels with Neuromag 306 data.  I am just
>>>> wondering whether there are any potential problems with using the
>>>> nearest neighbor interpolation, given the triplet format of the
>>>> Neuromag system (two planar gradiometers and one magnetometer).
>>>> If this is problematic, are there other options to fixing
>>>> bad/missing channels (e.g., can ft_channelrepair be run on just a
>>>> subset of the channels, say the gradiometers after I run
>>>> ft_combineplanar)?
>>>>
>>>> Thanks!
>>>> David
>>>>
>>>> --
>>>> David A. Ziegler
>>>> Department of Brain and Cognitive Sciences Massachusetts Institute
>>>> of Technology 43 Vassar St,  46-5121 Cambridge, MA  02139
>>>> Tel: 617-258-0765
>>>> Fax: 617-253-1504
>>>> daz at mit.edu <mailto:daz at mit.edu>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>> ---------------------------------------------------------------------------
>>
>>>> You are receiving this message because you are subscribed to the
>>>> FieldTrip list. The aim of this list is to facilitate the
>>>> discussion between users of the FieldTrip toolbox, to share
>>>> experiences and to discuss new ideas for MEG and EEG analysis. See
>>>> also http://listserv.surfnet.nl/archives/fieldtrip.html and
>>>> http://www.ru.nl/neuroimaging/fieldtrip.
>>>>
>> ---------------------------------------------------------------------------
>>
>>> Dr. J.M. (Jan-Mathijs) Schoffelen Donders Institute for Brain,
>>> Cognition and Behaviour, Centre for Cognitive Neuroimaging,
>>> Radboud University Nijmegen, The Netherlands
>>> J.Schoffelen at donders.ru.nl <mailto:J.Schoffelen at donders.ru.nl>
>>> Telephone: 0031-24-3614793
>>>
>>>
>> ---------------------------------------------------------------------------
>>
>>> You are receiving this message because you are subscribed to
>>> the FieldTrip list. The aim of this list is to facilitate the
>>> discussion
>>> between users of the FieldTrip toolbox, to share experiences
>>> and to discuss new ideas for MEG and EEG analysis.
>>> See also http://listserv.surfnet.nl/archives/fieldtrip.html
>>> and http://www.ru.nl/neuroimaging/fieldtrip.
>>>
>> ---------------------------------------------------------------------------
>>
>>
>

--

David A. Ziegler

Department of Brain and Cognitive Sciences
Massachusetts Institute of Technology
43 Vassar St,46-5121
Cambridge, MA 02139

Tel: 617-258-0765

Fax: 617-253-1504

daz at mit.edu <mailto:daz at mit.edu>

---------------------------------------------------------------------------
You are receiving this message because you are subscribed to
the  FieldTrip list. The aim of this list is to facilitate the discussion
between  users of the FieldTrip  toolbox, to share experiences
and to discuss  new ideas for MEG and EEG analysis.
See also http://listserv.surfnet.nl/archives/fieldtrip.html
and http://www.ru.nl/neuroimaging/fieldtrip.
---------------------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.science.ru.nl/pipermail/fieldtrip/attachments/20101027/27fececd/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Grads_noMaxfilter.jpg
Type: image/jpeg
Size: 313608 bytes
Desc: not available
URL: <http://mailman.science.ru.nl/pipermail/fieldtrip/attachments/20101027/27fececd/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Grads_postMaxfilter.jpg
Type: image/jpeg
Size: 334834 bytes
Desc: not available
URL: <http://mailman.science.ru.nl/pipermail/fieldtrip/attachments/20101027/27fececd/attachment-0003.jpg>